Hey there! Have you just gotten the keys to your BTO flat? If that’s a yes, then congratulations on getting your new home, and for getting a new “mission” of checking your BTO for defects.
Probably the easiest solution to this mission is to hire someone else to do the inspection job for you. But that’s gonna cost you at least $400 if you get a professional inspector. But defect rectification doesn’t end with submitting the defect list; you will still need to re-inspect after the rectifications are done and this may very well mean a BIGGER hole in the wallet if you need to hire a professional each time.
So, why not save this $400 and do the inspection yourself? After all, it’s not mission impossible, if you get yourself well prepared!
First things first, to get started, you need to know the basic 5 tips:
When you get the keys to your new apartment, you will also be given a Resident Feedback Form for your defects checking. This is the form where you fill up all your defects. To play safe, try to get hold of at least 5 copies of this form, in case you really have alot of defects or you end up losing/destroying any copy.
Yes, 7 days. No matter how busy you are, you’ve got to submit your defects list, within 7 days of your flat key collection, to your estate’s Building Service Centre. If you are not too sure about this, or need more time, you should probably drop HDB a call first to ask if there are any other workarounds you can arrange.
As far as we know, most BSC have similar opening hours, as follow:
Mon- Fri: 9.30am – 12pm, 1pm – 7pm
Sat: 9.30am – 12pm, 1pm – 5pm)
Closed on Sunday & Public Holidays
If you’re not too sure about the BSC availability, you can also check for more details in the Welcome Kit that you get from HDB when you collect your keys. Do ensure that you complete your inspection during their opening hours, to avoid making another trip down just for the form submission. Also, note that your BSC will not be around forever; the office is only set up in your estate for a period of time. So, to save you the hassle, try to ensure you get your maintenance requests all settled before BSC ceases operation near your flat vicinity.
Defects checking shouldn’t be taking you more than 7 days. After your submission of defects, the BSC will arrange for contractors to inspect the defects and carry out the rectification works. Depending on the seriousness of the defects, the rectification could take a couple of days or even weeks. When all the rectifications are done, your BSC will arrange for another joint inspection with you. Taking all these into consideration, you might want to keep a buffer of 2 – 3 weeks before starting your renovation, just in case the defects rectification takes some time.
HDB does not cover rectification items that surface during or after your own renovation works. So, if you have already planned for renovation, make sure that it only starts when all the defects have been rectified to your satisfaction!
Next, you need to get yourself prepared for the inspection. To keep things simple, here are 11 essential items you need to bring along for your inspection:
Did you know that after a BTO has completed its construction, HDB usually hires an independent third-party vendor to do defects-checking in some of the BTO units. Of course, the vendor’s version of the defects checklist will be a lot more detailed and complicated. But, to make things easier for you, here’s the simplified version of BTO defects checklist which covers the relevant defects that the vendor checks.